top of page

Grapples

Rock Bucket w. Grapple - Standard Duty

  • Laser cut Cutting Edge Gussets Tips of Tines

  • 3" Spacing Between Tines

  • Dual Grapple

  • Works Great as a Land Plane

More info @

Pipe and Pole Grapple

  • Two-cylinder independent clamp arms open to near vertical for handling palleted material.

  • 54ˮ wide frame keeps long material stable.

  • 48” or 60” Cascade® ITA Class II forged tines.

  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.

  • Greasable 1 1/4” diameter cylinder and hinge pins.

  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

More info @

Stump Bucket Grapple

  • A versatile grapple ideal for digging stumps and rocks, trenching and breaking up compacted soil.

  • Grapple jaw makes stump and rock removal easier and secures load for transport.

  • Tall sides provide capacity, while compact depth provides leverage to pry under stumps and rocks.

  • Corrosion, dent and flake resistant NitroSteel® cylinder rod made in the USA.­ Cylinder Guard standard.

  • Three flush mount shanks, with replaceable Series 23 cast teeth, welded to a 3/4” x 6” weld-on wear edge.

  • Bucket is reinforced on each side with three large gusset plates.

  • Stump Bucket without grapple also available.

More info @

Mat Grapple

- Made in Canada

-Dual Cylinders 

-60" tines

More info @

Light Duty Root Grapple

  • 3/8" Tines

  • Dual Top Clamps

  • Greasable Pivot Pins

  • 460 Lbs

  • Universal Mount

  • 3" x 3" Tube

  • 1" Pivot Pins

  • 2" Bore Cylinder 8" Stroke

  • Includes Hoses and Couplers

More info @

HD-root-grapple-7-edit.jpg

Heavy Duty Root Grapple

  • Width - 66" and 72"

  • 3/8" Steel

  • Opens to 27"

  • 33" Deep

  • 4" x 4" Tube

  • 1" Greasable Pins

  • 2" Bore Cylinder with 8" Stroke

  • 2 Independent Clamps

  • Cylinder Guards

  • Enclosed Hoses

  • Weight 66" - 650 Lbs / 72" - 700 Lbs

  • Available in Root Grapple or Grapple Bucket Style

More info @

Extreme Duty Root Grapple

  • 1/2" Steel - 60,000 PSI Minimum

  • 1 1/4" Pivot Pins in Bushings

  • Grease Fittings at all Pivot Points & Cylinder Ends

  • 4" x 4" Structural Tube

  • Cylinders - 1 1/4" Rod x 2" Bore 10" Stroke

  • Opens to 39" and 41" Deep

  • Enclosed Hoses and Cylinders

  • Independent Claws

  • Robotically Welded

  • Other sizes available

More info @

Mat Grapple

  • Our skid steer mat grapple is a great attachment for carrying everything from pipes and logs to pallets, but designed specifically for equipment mats. The adjustable cylinder mount point allows the grapple to open wider or close tighter depending on you needs. The tines can be 42”, 48” or 60” with a 4000 lb. capacity.

  • FEATURES:

  • Designed for equipment mats

  • 60″ tines with reinforced support

  • Special top clamp for holding mats

  • 4 position cylinder

  • Teeth on grapple for gripping mats

More info @

Matt Grapple

  • Designed specifically for moving rig mats

  • 66" wide frame provides good stability

  • 6000 lb. heavy duty ITA class II tines

  • 2.5" bore greasable cylinders

  • Reinforced grapple arms.

  • Tooth bar holds mats securely in place

More info @

Mini Grapple

  • These strong yet compact grapples are the balance between weight and strength. Featuring great visibility, a fast-acting cylinder, and a bolt-on edge make this grapple the right choice for the most demanding conditions.

  • Also available in Root Grapple style.

More info @

Hi-Capacity Grapple

  • Extra Heavy Duty Construction for heavy work loads

  • AR400 steel floor

  • Available with Telehandler or Wheel loader mounts.

  • Made in Canada by Martatch

  • Available in 84", 88", 96", 102", and 108"

More info @

Pallet Fork Grapple

  • Just Drive into your existing forks

More info @

Multipurpose Pallet Fork Grapple Assembly

  • Grapple unit great for handling pipe, logs, rig mats, etc,  5500 lb rated capacity, standard 48" tines,  60" tines optional.

  • Adjustable cylinder mount.

  • ​

More info @

Manure Tines w. Grapple

  • • Available from 60" to 108"
    • Useful for large bales, manure, debris, logs, stones, etc.
    • Can be fitted    on any front end loader or skid steer
    • 36" Conus I cranked tines – 31" useable length at 8" centers
    • Original Kverneland Tines - Simply the best tines on the market

More info @

Root Rake Grapple

  • 48" to 80" Widths
    • Plasma cut 1/2" AR400 high tensile strength teeth
    • Teeth spaced at 8" centers
    • 36" height Double Grapple
    • Hoses included

More info @

Large Volume Bale Handler

  • • Handles 2 large round bales (4' - 6' diameter)
    • Handles 3-4 large square bales
    • The Bale Grabber is ahead of its time in versatile and sheer volume bale handling
    • Adjusts easily and without tools to different size bales
    • The right tool to handle large volumes of bales with ease!

  • Made in Canada by Martatch

More info @

1124_1 (002).jpg

Rock Bucket with Grapple

1124_2 (002).jpg

Smooth Bucket with grapple

bottom of page